Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]
Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]

Haltech Nexus S2 Plug 'n' Play Adapter Harness Kit - Honda EP3 [HT-212302]

$2,880.00
 per 

Taxes included.

Shipping calculated at checkout.

Select The Options Above
Description

Haltech's Nexus S2 is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. The S2 combines all the classic functionality of the Elite 1500 with new features and the superior processing power of the successful Nexus platform.

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug 'n' Play Adapter Kits. These adapters plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.

A simple Haltech Plug 'n' Play product that allows you to be up and running in just a few hours.

The quick start guide will walk you through installation of the Haltech Plug 'n' Play adapter into your vehicle.

This harness when installed in conjunction with a Haltech Nexus S3 ECU opens the door to virtually limitless performance modification and tuning of your vehicle.

Features

  • 4 x peak/hold injector drivers (can be used as low side drive outputs)
  • 4 x low current ignition outputs (can be used as low side drive outputs)
  • 6 x low side drive outputs, PWM capable (DPOs)
  • 4 x push-pull / half bridge outputs (8A, PWM capable), eg for electronic throttle
  • 1 x ECR output
  • 11 x 0-5V analog inputs with redundancy for electronic throttle and switchable 5V pullup
  • Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters
  • 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs
  • 1 x on-board wideband controller, supporting NTK and LSU4.9
  • 1 x on-board 4 bar MAP sensor
  • 2 x CAN ports with switchable termination
  • Onboard data logging - Up to 300 channels of logging at sample rates up to 1ms (1kHz) with 128MB of internal memory
  • Controlled via NSP (Nexus Software Programmer)
  • Long Term Learning
  • Stepper Motor Control
  • 4D Closed Loop Boost Control
  • Closed Loop CO2 Control
  • Rotational Idle
  • Launch Control
  • Traction Control
  • Anti-Lag
  • Dual Knock Control
  • Trans Brake Control
  • Race Timer
  • Multi Stage Fuel Injection
  • Multi-level Engine Protection
  • 6 Stage Nitrous Control
  • 4-sensor variable cam control
  • Intake Air Bleed Control
  • Flat Shift Control
  • Shock Travel & Ride Height Control
  • Advanced Torque Management
  • On-board Wi-Fi
  • On-board datalogging (128MB)
  • Ford AODE/4R70W
  • Toyota A340E
  • Lenco
  • Liberty

Specifications

Analog Voltage Inputs (AVI) 11
Differential Engine Position Inputs 2 (Trigger and Home)
Digital Pulsed Inputs (DPI) 0
Synchronized Pulsed Inputs (SPI) 6
Knock Sensor Inputs 2
On-board Wideband Controller 1 x NTK/LSU 4.9
Injection 4 (peak and hold)
Ignition 4
Ignition Switch Input 1
Engine Control Relay output 1
Total Digital Pulsed Outputs (DPO) 6
Half Bridge Outputs (HBO) 4 8A
On-Board PDM NO
25A High Current Outputs (HCO) 0
CAN Bus Networks 2
MAP sensor Internal (4 BAR)
Inertia / G-Sensor NO
USB 2.0 USB-C
Low Power Up via Cable YES
Wi-Fi YES
Compatible with Haltech Connect App YES
Anti-Lag/Rotational Idle YES
Boost Control 4D Closed Loop
Closed Loop O2 Control Dual
CO2 Control YES
Drive-By-Wire Throttle Dual
Engine Protection Multi-Level
Flat Shift Support Advanced
Flex Fuel YES
Intake Air Bleed Control YES
Knock Control Dual
Launch Control YES
Long Term Learning Up to 4D
Nitrous Control Stages Up to 6
Race Timer YES
Rolling Anti-Lag YES
Shock Travel & Ride Height YES
Torque Management (Driveshaft and Engine RPM Targeting) YES
Traction Control YES
Trans Brake YES
Tuning Table Resolution 32x32x8 4D
Variable Cam Control Up to 4
Onboard storage 128MB

Part number: HT-212302

Please note: a Haltech ECU must be installed and tuned by a qualified tuner or auto electrician before the vehicle is driven. Installation and tuning are not included.

Shipping & Payment

Flat-rate shipping, Australia-wide. One simple rate on every order — no surprises at checkout.

Processing. Orders are processed within 1–2 business days.

Tracking. We email your tracking details once your order is on the move.

Pay your way. Visa, Mastercard, Amex, PayPal, Apple Pay and Google Pay — or split it into interest-free instalments with Zip or Afterpay.

Shipping Policy • About Zip • About Afterpay