Haltech Nexus R5 ECU + Universal V8 Terminated Harness [HT-195400]
Taxes included.
Shipping calculated at checkout.
Description
Nexus R5 is Haltech's flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).
Terminated Engine Harness connects directly to the Nexus R5 VCU and supports most popular big block and small block V8 engines from GM, Ford and Chrysler.
Features
- 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump)
- 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensors, NOS solenoids, etc)
- 18 x peak/hold injector drivers (can be used as low side drive outputs)
- 12 x low current ignition outputs (can be used as low side drive outputs)
- 8 x low side drive outputs, PWM capable (DPOs)
- 4 x push-pull / h-bridge outputs (8A, PWM capable), eg for electronic throttle
- 23 x 0-5V analog inputs with redunancy for electronic throttle and switchable 5V pullup
- Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters
- 10 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs
- 2 x onboard wideband controllers, supporting NTK and LSU4.9
- 3 x CAN ports with switchable termination
- Onboard data logging - Up to 300 channels of logging at sample rates up to 1ms (1kHz) with 512MB of internal memory
- Harness requires Injection, Ignition and alternator Sub Harnesses - Sold seperately
- Injector breakouts
- HT-186000 V8 Primary Injector EV1
- HT-186001 V8 Secondary Injector EV1
- HT-186002 V8 Primary Injector USCAR
- HT-186003 V8 Secondary Injector USCAR
- Ignition breakouts
- HT-186060 Nexus V8 GM/Chrysler IGN1A
- HT-186061 Nexus V8 Ford IGN1A
- Alternator breakouts
- HT-186123 GM LS 2-Pin Bosch Alternator Harness
- HT-186124 GM LS 4-Pin Delco Alternator Harness
- HT-186125 GM LS 2-Pin Yazaki Alternator Harness
- Controlled via NSP (Nexus Software Programmer)
- Long Term Learning
- Stepper Motor Control
- 4D Closed Loop Boost Control
- Closed Loop CO2 Control
- Rotational Idle
- Launch Control
- Traction Control
- Anti-Lag
- Dual Knock Control
- Trans Brake Control
- Race Timer
- Multi Stage Fuel Injection
- Multi-level Engine Protection
- 6 Stage Nitrous Control
Specifications
| Analog Voltage Inputs (AVI) | 23 |
|---|---|
| Differential Engine Position Inputs | 2 (Trigger and Home) |
| Digital Pulsed Inputs (DPI) | 0 |
| Synchronized Pulsed Inputs (SPI) | 10 |
| Knock Sensor Inputs | 2 |
| On-board Wideband Controller | 2 x NTK/LSU 4.9 |
| Injection | 18 (peak and hold) |
| Ignition | 12 |
| Ignition Switch Input | 1 |
| Engine Control Relay output | 0 |
| Total Digital Pulsed Outputs (DPO) | 8 |
| Half Bridge Outputs (HBO) | 4 8A |
| On-Board PDM | YES |
| 25A High Current Outputs (HCO) | 4 |
| CAN Bus Networks | 3 |
| MAP sensor | External |
| Inertia / G-Sensor | YES |
| USB 2.0 | USB-C |
| Low Power Up via Cable | YES |
| Wi-Fi | YES |
| Compatible with Haltech Connect App | YES |
| Anti-Lag/Rotational Idle | YES |
| Boost Control | 4D Closed Loop |
| Closed Loop O2 Control | Dual |
| CO2 Control | YES |
| Drive-By-Wire Throttle | Dual |
| Engine Protection | Multi-Level |
| Flat Shift Support | Advanced |
| Flex Fuel | YES |
| Intake Air Bleed Control | YES |
| Knock Control | Dual |
| Launch Control | YES |
| Long Term Learning | Up to 4D |
| Nitrous Control Stages | Up to 6 |
| Race Timer | YES |
| Rolling Anti-Lag | YES |
| Shock Travel & Ride Height | YES |
| Torque Management (Driveshaft and Engine RPM Targeting) | YES |
| Traction Control | YES |
| Trans Brake | YES |
| Tuning Table Resolution | 32x32x8 4D |
| Variable Cam Control | Up to 4 |
| Onboard storage | 512MB |
Part number: HT-195400
Please note: a Haltech ECU must be installed and tuned by a qualified tuner or auto electrician before the vehicle is driven. Installation and tuning are not included.
Shipping & Payment
Flat-rate shipping, Australia-wide. One simple rate on every order — no surprises at checkout.
Processing. Orders are processed within 1–2 business days.
Tracking. We email your tracking details once your order is on the move.
Pay your way. Visa, Mastercard, Amex, PayPal, Apple Pay and Google Pay — or split it into interest-free instalments with Zip or Afterpay.


![Haltech Nexus R5 ECU + Universal V8 Terminated Harness [HT-195400]](http://www.marsanicmotorsport.com.au/cdn/shop/files/HT-195400_00.jpg?v=1794967192&width=1445)