Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]
Haltech Elite 2500 ECU [HT-151300]

Haltech Elite 2500 ECU [HT-151300]

$2,795.00
 per 

Taxes included.

Shipping calculated at checkout.

Select The Options Above
Description

Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, 8 cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts.

Featuring a robust environmentally sealed water-resistant case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right.

The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide.

Connect to a wide range of display dashes and expansion devices via CAN.

Traction Control – Control your engines power output via mappable front vs rear axle or individual wheel speed slip.

Features

  • Supports 1 to 12 Cylinder engines
  • 2 to 4 Rotor engines
  • Normally aspirated or forced induction
  • Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
  • Staged, Sequential, semi sequential, batch or multipoint injection patterns
  • Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
  • Waterproof Resistant (With Pocket Cover Fitted)
  • 8 x Fuel Injection Outputs
  • 8 x Ignition Outputs
  • 12 x Digital Outputs
  • 10 x Analogue Voltage Inputs
  • 4 x Synchronised Pulsed Inputs
  • 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor)
  • 2 x Dedicated Engine Position Inputs with extensive trigger type support
  • Up to 45 channels of Input & Output (I/O) expansion (via CAN)
  • USB Laptop communication (Windows)
  • Now using the new NSP Calibration Software
  • Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs (4) user defined inputs
  • Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
  • Flex Fuel Function (Direct sensor input) - Tune your engines boost, fuel and ignition by ethanol content
  • Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel type
  • Closed Loop 02 Control – Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
  • Dual Channel Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection
  • Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam
  • Closed Loop Idle Speed Control with learning for consistent idle stability Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
  • Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D)
  • On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory
  • Laptop data logging –Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics
  • Dual CAN Bus communication for Haltech Dashes and expansion devices, Supported OEM CAN & OBDII (view live engine data & set and clear diagnostic trouble codes)
  • Injection Stages: up to 4 with individual injector flow rates per injector
  • 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines
  • Anti-Lag/Rotational idle – for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
  • Rolling Anti-Lag – lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
  • Launch Control – Control your engines power delivery, RPM & boost for consistent performance at the start line
  • Tuning Table Resolution up to 32 x 32 x 8
  • Limitless tuning flexibility -Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
  • Per Cylinder Tuning Correction - 3D
  • Wideband O2 - Connect up to 9 Channels via CAN expansion devices
  • Thermocouples/EGT (Exhaust Gas Temperature) - Connect up to 12 Channels via external CAN expansion devices
  • Engine Protection – Set advanced multi-level limits for sensors and protect your engine against common causes of failure

Specifications

Analog Voltage Inputs (AVI) 10
Differential Engine Position Inputs 2 (Trigger and Home)
Digital Pulsed Inputs (DPI) 0
Synchronized Pulsed Inputs (SPI) 4
Knock Sensor Inputs 2
On-board Wideband Controller NO
Injection 8 (peak and hold)
Ignition 8
Ignition Switch Input 1
Engine Control Relay output 1
Total Digital Pulsed Outputs (DPO) 5
Half Bridge Outputs (HBO) 4 Stepper 2 DBW
On-Board PDM NO
25A High Current Outputs (HCO) 0
CAN Bus Networks 2
MAP sensor Internal (4 BAR)
Inertia / G-Sensor NO
USB 2.0 USB-B
Low Power Up via Cable NO
Wi-Fi NO
Compatible with Haltech Connect App NO
Anti-Lag/Rotational Idle YES
Boost Control 4D Closed Loop
Closed Loop O2 Control Dual
CO2 Control YES
Drive-By-Wire Throttle Single
Engine Protection Multi-Level
Flat Shift Support Advanced
Flex Fuel YES
Intake Air Bleed Control YES
Knock Control Dual
Launch Control YES
Long Term Learning Up to 4D
Nitrous Control Stages Up to 6
Race Timer YES
Rolling Anti-Lag YES
Shock Travel & Ride Height YES
Torque Management (Driveshaft and Engine RPM Targeting) NO
Traction Control YES
Trans Brake YES
Tuning Table Resolution 32x32x8 4D
Variable Cam Control Up to 4
Onboard storage 8MB

Part number: HT-151300

Please note: a Haltech ECU must be installed and tuned by a qualified tuner or auto electrician before the vehicle is driven. Installation and tuning are not included.

Shipping & Payment

Flat-rate shipping, Australia-wide. One simple rate on every order — no surprises at checkout.

Processing. Orders are processed within 1–2 business days.

Tracking. We email your tracking details once your order is on the move.

Pay your way. Visa, Mastercard, Amex, PayPal, Apple Pay and Google Pay — or split it into interest-free instalments with Zip or Afterpay.

Shipping Policy • About Zip • About Afterpay