No Products in the Cart
One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for the higher-output 2.0 TFSI K04 engines in Golf 6R, Scirocco R and the Golf 5 GTI Ed30/Pirelli.
Our High-Flow TriFoam triple-layer construction is simply the best filtration material on the market, and is the key to the power gains achieved. Each filter is handmade in the UK. ?Some people forget that it’s what’s inside an intake system that really matters.
Developed for use in our Volkswagen Racing cars, the system delivers really impressive airflow gains – as much as 9% higher at peak power than that of the original intake system. By reducing turbo spool by up to 500rpm in some cases through the enhanced efficiency of the system, lightning fast turbo response is guaranteed. In our experience, no other intake kit gives higher gains.
Through keeping intake temperatures as low as possibly, and greatly improving airflow into the engine, more power is produced, turbo lag is reduced and better fuel efficiency is achieved.
Turbocharger spool can drop nearly 500 RPMs, reducing turbo lag and creating faster turbo response.
Our development has shown that a high-flow intake system on the 2.0 TFSI K04 engine really gives worthwhile gains ?on uprated cars = so this intake is best combined with a remap.
Our testing on the VWR Cold Air Intake has given gains of 30bhp on a Stage 2 car, or around 9% more effective peak power compared with the standard factory air box. ?Testing on cars running 300bhp and beyond shows further increased power improvements from the Intake system, as the standard air box and filter reaches and exceeds its airflow limit.
As a race-bred intake system, the rich induction noise is clear as soon as you first accelerate hard. However volume levels are well-contained, and the sound quality is music to the ears of any enthusiastic driver!
The intake uses a fully-enclosed gloss black-anodised aluminium spinning which contains the high flow triple-layer cone filter. ?Stainless steel or plated screws, nuts and washers are used throughout the kit to enhance both appearance and durability = and of course to enhance the engine bay appearance.
The VWR Cold Air Intake integrates seamlessly with the factory management system to provide the perfect basis for modifying the car.
The silicon hose joining the turbocharger and the intake system features a formed internal lip, resulting in a smooth transition into the turbocharger, and a sophisticated hose clamp allows for continuous clamping pressure around the entire hose. This intake replaces the original factory engine cover.
Our TriFoam triple-layer laminate of open-cell polyurethane foam gives an exceptionally high level of filtration to protect the engine from contaminants in the air down to well below 5 microns, giving the highest level of filtration to protect your engine
All our filters are hand-built in the UK from the highest quality materials available.
The end result of our development is the exact Cold-Air Intake System that we use in our race cars, which also makes for one of the most popular and effective modifications for a road car.